i
Superseded
This Document Has Been Replaced By:
i
Retired
This Document Has Been Retired
i
Up-to-date Information
This is the latest update:
Adjusting Lidar-Derived Digital Terrain Models in Coastal Marshes Based on Estimated Aboveground Biomass Density
-
Published Date:
2015
-
Source:Remote Sensing, 7(4), 3507-3525.
-
Details:
-
Personal Author:
-
Description:Digital elevation models (DEMs) derived from airborne lidar are traditionally unreliable in coastal salt marshes due to the inability of the laser to penetrate the dense grasses and reach the underlying soil. To that end, we present a novel processing methodology that uses ASTER Band 2 (visible red), an interferometric SAR (IfSAR) digital surface model, and lidar-derived canopy height to classify biomass density using both a three- class scheme (high, medium and low) and a two-class scheme (high and low). Elevation adjustments associated with these classes using both median and quartile approaches were applied to adjust lidar-derived elevation values closer to true bare earth elevation. The performance of the method was tested on 229 elevation points in the lower Apalachicola River Marsh. The two-class quartile-based adjusted DEM produced the best results, reducing the RMS error in elevation from 0.65 m to 0.40 m, a 38% improvement. The raw mean errors for the lidar DEM and the adjusted DEM were 0.61 +/- 0.24 m and 0.32 +/- 0.24 m, respectively, thereby reducing the high bias by approximately 49%.
-
Document Type:
-
Funding:
-
Collection(s):
-
Main Document Checksum:
- File Type:
-
Supporting Files:No Additional Files
No Related Documents.